Adds 16 outputs (8 voltage, 8 relays) to M1 Gold or M1EZ8 Controls. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.

• 8 Voltage Outputs 
• 8 Single-Pole, Double-Pole Relay Outputs 
• Operates on the 4-Wire Data Bus 
• DIP Switch Address Settings 
• Flash Memory for Firmware Updating 
• One (1) - Twelve (12) Conductor "Flying Lead" Wire Harness 
• Voltage Outputs may be converted to Relays using M1RB Relay Boards 
• Status LED with Diagnostic Display 
• Mounts in Enclosure using ELK-SWG Glides, SWP or SWP3 Structured Wire Plates, or Double Sided Foam Tape

• Voltage Outputs: 12 VDC @ 50 mA each 
• Relay Outputs: SPDT rated for 7 Amps @ 28VDC, 10 Amps @ 125 VDC 
• Wire Harness Length: 12" 
• Operating Power Range: 9 to 14 VDC 
• Current Draw: 65 mA Nom., 330 mA Max. 
• Size: 6" x 3.25" x .75" H